Jump to Main Content
USA flagAn Official Website of the United States Government
Archive

Blogs.Archive

Register

Made in the USA Labels: Information for Manufacturers, Retailers, and Consumers

Comment Count:
6

Comments welcome on this page. See Rules of Conduct.

Made in the USA Labels: Information for Manufacturers, Retailers, and Consumers

By JamieD
Published: March 23, 2010 Updated: February 11, 2011

Attention all manufactures and retailers - do not advertise your products as "Made in the USA." if, in fact, they are not made in the United States. If half your product is made in the U.S while the other half is manufactured in China, you cannot claim it is "American-made." While it may seem appealing to stretch the meaning of "American-made," the Federal Trade Commission holds the power to enforce laws against businesses that make false or misleading claims about a product's U.S origin. To protect consumers, the Commission requires that all products advertised as American-made must be "all or virtually all" made in the U.S. Keep reading for more information on making sure your business is in compliance with the "all or virtually all" standard.

 

------------------------------------

 

The phrase "American-made" isn't just a patriotic statement - it's also an advertising claim that appeals to many U.S. consumers by promoting the idea of stimulating the U.S. economy. Besides a few exceptions (country-of-origin and other laws), there is no law requiring products sold in the United States disclose information on U.S. made goods. However, if you choose to represent your product as American-made, you must comply with the FTC's Made in the USA policy.

 

Product Advertisements

 

Product advertisements fall into one of two categories:

  • Expressed advertisements (such as labels with "Made in the USA.", "Our Products are American-Made", "USA" claims) or

  • Implied advertisements ( give the overall impression that a product is of U.S. origin). Using U.S. symbols such as a flag, map, or geographic reference can be considered implied claims in certain circumstances.

 

Both expressed and implied advertisements are subject to FTC law enforcement.

 

Although the Commission does not pre-approve advertisements, manufactures and retailers, acting in truth and good faith do not need permission to make a claim. The FTC's Enforcement Policy Statement outlines what factors and guidelines will be used to determine if a U.S. origin claim is misleading or deceptive.

 

Making a Claim

 

"Made in USA" claims describe the extent, amount, or type of a product's U.S. origin content.

 

Unqualified Claims are held to the "all or virtually all" standard. The "all or virtually all" standard requires that

 

  • All significant parts and processing are of U.S. origin and

  • Products contain no foreign content - even if the percent is negligible.

 

The Commission considers several factors in determining if a product meets this standard:

 

  • A product's final assembly or processing must take place in the Untied States

  • The amount of a product's total manufacturing costs that can be attributed to U.S. parts and processing

  • How far removed any foreign content is from a finished product

 

When used in good faith, information from an American supplier can be used to verify domestic materials, but it is wise to request domestic percentages before advertising. To make an unqualified claim, manufacturers or retailers should rely on a "reasonable basis" of competent and reliable evidence that supports their claim, including the cost of goods sold or inventory costs of finished goods. These costs generally include manufacturing materials, direct manufacturing labor, and manufacturing overhead. To account for the percentage of U.S. content, look back far enough to ensure a reasonable understanding that all foreign content has been accounted for in costs.


 

Tip: Consumers generally find foreign content incorporated early in the manufacturing process less significant than foreign content directly related to the finished product.

 

Qualified Claims indicate that a product is partially, rather than completely, American-made. Examples of such claims include "70% U.S. Content" and "Manufactured in USA. of U.S. and Imported Parts". These claims are appropriate for products that have a significant amount of U.S. content but do not meet the standard of an unqualified claim. Qualified claims are held to the same standards as unqualified claims.

 

When making qualified claims, do not imply that more domestic content exists than actually does. For example, if a claim is made that a rubber sole of a shoe, was manufactured in the U.S., that part must be specifically referenced rather than the shoe as a whole.

 

Tip: Qualified claims that use words such as "produced", "created", and "manufactured" imply the "all or virtually all" standard and generally need additional qualifications to clearly convey that these terms are limited to a particular part or process.

 

Comparative Claims make claims of your products U.S. origin content compared to another product or brand's origin. Examples of such claims include "Our product uses more U.S. content than all other camera manufacturers" or "Our new model uses 50% more U.S. content as the previous model". These claims are held to the same truth and good faith standards as unqualified and qualified claims.

 

Tip: Comparative claims must be substantial. A comparison claim against another manufacturer that proves only a small difference in U.S. origin, or a claim that a new model has "more" U.S. origin content but in reality only has 3% more, would both be considered deceptive claims.

 

Assembled in USA Claims are valid for products with foreign components that have a substantial assembly process which principally takes place in the U.S. For a valid "assembly" claim, the last "substantial transformation" of a product must take place in the U.S. Products meeting these standards can be advertised as "Assembled in the USA".

 

Tip: Be sure to pay careful attention to which portions of the assembly process takes place in the U.S. Assembly of foreign products at the end of the manufacturing process will generally not qualify.

 

For more information, check out the FTC guide to Complying with the Made In the USA Standard.

About the Author:

Comments:

The phrase "American-made" isn't just a patriotic statement - it's also an advertising claim that appeals to many U.S. consumers by promoting the idea of stimulating the U.S.
Currently, people are often quite sensitive to the label "Made in China". The label "Made in USA" is pretty much the option, though more expensive price. My company's products are mostly the label "Made in Germany", just look at the label that the customer is also quite interested in the product.
This is very helpful and leaves a source with the FTC to dig further into the laws around labeling. I used this source to answer a question on Twitter where a large chain store is removing the "Made In China" label to hide that fact. This may fool some people, but if it does not say "Made In USA", assume it is not. That seems to be the take away. Thanks for posting your interpretation of the FTC laws.
The phrase "American-made" isn't just a patriotic statement - it's also an advertising claim that appeals to many U.S. consumers by promoting the idea of stimulating the U.S.
I currently drive a Audi vehicle which is obviously not American made. However, I was interested in buying Audi wheels and rims that were made in America. Is there any way to find out if aftermarket Audi Wheels have been made in America? Although I do not drive an American made car, I would like to support our country by purchasing aftermarket products made in the US. There are a few wheels that I am looking to purchase. Here is the link to the website I'm looking to purchase them from modbargains. The brands I am considering are VMR, Miro, and TSW.
I currently drive a Audi vehicle which is obviously not American made. However, I was interested in buying Audi wheels and rims that were made in America. Is there any way to find out if aftermarket Audi Wheels have been made in America? Although I do not drive an American made car, I would like to support our country by purchasing aftermarket products made in the US. There are a few wheels that I am looking to purchase. Here is the link to the website I'm looking to purchase them from Audi Wheels

Leave a Comment

You must be logged in to leave comments. If you already have an SBA.gov account, Log In to leave your comment.

New users, Register for a new account and join the conversation today!